regupol-schutz-trennlage_flachdaecher3_04

Regupol® Protective Layers for Flat Roofs

Regupol® resist FH
The Regupol® resist FH building protection sheet is the new product from BSW to protect membranes and insulations, and to reduce the fire load on flat roofs. The flame-retardant equipment makes the sheets made of PUR-bound rubber granulates resistant against flying sparks and radiant heat.
Areas of application
On the membranes of flat roofs underneath gravel filling, tile material, etc., underneath solar modules and as hard roofing.
csm_regupol-resist-fh_02_64976ded86
 
Regupol® resist 
Regupol® resist is the most versatile product to protect membranes and insulations. It is made of PUR-bonded rubber fibres and granules. Regupol® resist is classified as a protective layer in accordance with DIN 18195, part 10. In comparison to protective screed and concrete, Regupol® resist possesses clear technical, physical and financial advantages. It is easy to install and can be optimally bonded to any kind of sub-bases by means of hot bitumen, special adhesives and plastic adhesives.
Areas of application
Flat roofs, patios and balconies, car park decks, inverted roofs, building construction, public works and civil engineering, pipeline construction, pre fabricated buildings, construction of flues and airducts, protection of membranes, insulating materials.
csm_regupol-resist_01_1fa63a2564
Regupol® resist 9510
Regupol® resist 9510 is an alternative to Regupol® resist for protective roof membranes and insulation, as well as for higher loads. Regupol® resist 9510 consists of PUR-bonded butyl rubber and is classified as a protective layer in accordance with DIn 18195, part 10.
Areas of application
On roof membranes on high-load building membranes, flat roofs, under terrace floors, etc.
csm_regupol-resist-9510_01_d72854a0d6
 
Regupol® drain plus 
Regupol® drain plus provides both a protection and drainage layer. The top side of Regupol® drain plus is laminated with a fibre fabric which allows only liquids to seep through. The profiled underside makes sure that liquids can drain off. Regupol® drain plus possesses high mechanical load capacity, does not corrode and is spade-resistant.
Areas of application
Beneath roof plantings an terrace slabs
csm_regupol-drain-plus_01_4a5b2e018f
Regupol® hot plus
The underside of Regupol® hot plus is coated with a hot melt adhesive so that overlapping and vertical joints can be welded by hot air treatment.
Areas of application
Regupol® hot plus can be optimally bonded to membranes such as Wolfin, EPDM, PVC, bituminous waterproof membranes (adhesiveness to be tested in advance).
csm_regupol-hot-plus_01_83f5a293f2
 
Regupol® stabi plus
Regupol® stabi plus has a laminated fibre fabric coating which provides the necessary dimensional stability. Overlapping and shaping can be avoided. Regupol® stabi plus offers approx. 75% less expansion/ shrinking under variations in temperature in comparison to conventional standard products.
Areas of application
Regupol® stabi plus is used for intermediate protection purposes. It can also be used as a separating layer on membranes. The excellent tensile strength allows also vertical installation, for example in civil engineering.
csm_regupol-stabi-plus_01_82b12c8c05
Regupol® Roofing and Pavement Tiles
Regupol® Roofing and Pavement Tiles serve as inspection paths on flat roofs and as protective basic elements for solar collectors, antennas ans building engineering equipment. The flame-retardant properties make Regupol® Roofing and Pavement Tiles resistant to flying sparks and radiant heat. They meet the requirements of hard roofing.
Areas of application
Maintenance paths on flat roofs with and without load, base panels for solar systems, antennas, building engineering equipment, etc.
csm_regupol-dach-gehwegplatte_01_f7938080c0
 

Regupol® Protective Layers for Solar Installations

Reliable - Durable - Proven

The footprints of solar modules on flat roofs can damage the roof membrane. Therefore, they have to be separated from the membrane with protective layers. With Regupol® resist solar, BSW offers a selection of highly resistant protective layers. A broad range of product varieties offers the installer the possibility to find the right protective layer for the individual construction and type of flat roof.

Regupol® resist solar AK
Regupol® resist solar AK is the new building protection sheet for bearing solar systems on flat roofs. Regupol® resist solar AK is lined with a triplex aluminium foil on its underside. It thus prevents plasticizer migration between non-rubber-compatible membranes (e.g. soft PVC) and the building protection material. Regupol® resist solar AK is also available as a flame-resistant version and minimizes damages caused by flying sparks, radiant heat and fireworks.
Areas of application
On roof membranes on flat roofs underneath solar modules and as hard roofing. No plasticiser migration also when used on PVC membranes.
csm_regupol-resist-solar_01_9465293cfb
 
Regupol® walkway AK
The elastic pavement tiles Regupol® walkway AK serve as inspection paths on flat roofs and as protective basic elements for solar collectors, antennas and building engineering equipment. Their flame-retardant properties make Regupol® walkway AK resistant to flying sparks and radiant heat. They meet the requirements of “hard roofing”. Their dense, viscoplastic material properties protect the membrane. Compared to concrete tiles, their low weight greatly facilitates installation and is a static advantage. Thanks to a simple dowel system, installing the tiles is easy and they can be used instantly. Their underside is lined with aluminium foil to counteract the plasticiser loss of non-rubber-compatible membranes. The available colours of red, green and black can mark the maintenance paths even at low visibility. On their undersides are crosswise drainage grooves, which makes it possible to position them in any direction towards the incline.
Areas of application
Maintenance paths on flat roofs with and without load, base panels for solar systems, antennas, building engineering equipment, etc. No plasticiser migration also when used on PVC membranes.
csm_regupol-walkway-ak_01_168cfe25f9

Regupol® Growth-Inhibiting Mats

Regupol® Growth-Inhibiting Mats
For decades, Regupol® Growth-Inhibiting Mats have been an established product for avoiding unwanted vegetation. Their use bypasses the unpopular use of herbicides, permanently prevents unwanted growth and makes frequent mowing unnecessary. The mats prevent the penetration ot UV light so that the plants under the mats cannot grow. The mats are permeable to water, thus preserving microbial soil life and avoiding erosion. The weight of the mats means that they lie safely and firmly in position, and their material composition means that they do not rot.
Areas of application
Possible uses: railway, Perfect sealing of connections, application at airports, Other possible uses.
csm_regupol-aufwuchssperren_02_3ee2ea910b

keraflex® Terrace and Balcony Surfacing & Flooring

Quick and easy installation, low structural height

The innovative refurbishment system for deck and balcony flooring is called keraflex®. keraflex® is a floor made of elastic basis mats and tiles that can be laid directly on the sealed, old floor. That saves time and money and prevents the dirt from demolition work as it makes removing the old covering superfluous. keraflex® is absolutely frost-proof, water permeable, impact sound insulating and has only slight installation height. keraflex® is installed by roofers, balcony builders and refurbishing companies. 
On the other hand, the elastic keraflex® balcony and deck sheets are suitable for do-it-yourself installation. They are pleasantly soft, imparting a walking feeling like forest soil. That's why they are ideally suitable as play areas for children or as coverings for a feel-good oasis for relaxing.

 
keraflex® EL
keraflex® EL balcony and terrace tiles offer you a uniquely pleasant feeling underfoot. They are as soft as forest floors, each step sinking in slightly. You can go barefoot here and relax. The tiles consist of synthetic rubber. The material is pleasantly warm. You can easily install keraflex® EL balcony and terrace tiles yourself and also remove them again if required.
Areas of application
For balconies, terraces, the borders of swimming pools and wading pools, under swings and other playground equipment, as garden paths, in greenhouses and for all other surfaces around the house and in the garden.
csm_keraflex-el_01_b3fe972b3d
 
keraflex® MC
keraflex® MC balcony and terrace tiles combine a high-quality appearance, quick and easy installation, and robust, durable properties. The tiles are made of synthetic rubber and are extremely robust. The toplayer of the tiles consists of our tried-and-tested everroll® surface.
Areas of application
For balconies, terraces, the borders of swimming pools and wading pools, under swings and other playground equipment, as garden paths, in greenhouses and for all other surfaces around the house and in the garden.
csm_keraflex-mc_01_d25ad68629